Automated design of optimum longitudinal reinforcement for flexural and axial loading
Ver/
Compartir
Métricas
Estadísticas
Ver Estadísticas de usoMetadatos
Mostrar el registro completo del ítemFecha de publicación
2012Editorial
Techno-PressCita bibliográfica
TOMÁS ESPÍN, Antonio, ALARCÓN VERA, Antonio Luis. Automated design of optimum longitudinal reinforcement for flexural and axial loading. En Computers and Concrete, 2012, nº 10 (2) p. 149-171. ISSN 1598-8198Palabras clave
Cross sectionFlexural/axial loading
Automated design
Optimum reinforcement
Resumen
The problem of a concrete cross section under flexural and axial loading is indeterminate due to the existence of more unknowns than equations. Among the infinite solutions, it is possible to find the optimum, which is that of minimum reinforcement that satisfies certain design constraints (section ductility, minimum reinforcement area, etc.). This article proposes the automation of the optimum
reinforcement calculation under any combination of flexural and axial loading. The procedure has been implemented in a program code that is attached in the Appendix. Conventional-strength or high-strength concrete may be chosen, minimum reinforcement area may be considered (it being possible to choose between the standards ACI 318 or Eurocode 2), and the neutral axis depth may be constrained in order to guarantee a certain sectional ductility. Some numerical examples are presented, drawing comparisons between the results obtained by ACI 318, EC 2 and the conventional method.
Colecciones
- Artículos [1738]
El ítem tiene asociados los siguientes ficheros de licencia:
Redes sociales