Effect of micro-encapsulated phase change materials on the mechanical properties of concrete
Author
Pilehvar, ShimaDirector/a
Pamies Porras, Ramón Francisco; Kjoniksen, Anna-LenaCenter
Escuela Internacional de Doctorado de la Universidad Politécnica de CartagenaUniversity
Universidad Politécnica de CartagenaPrograma de doctorado
Programa de Doctorado en Tecnologías Industriales por la Universidad Politécnica de CartagenaFecha de lectura
2018-10-25Publication date
2018Publisher
Shima PilehvarKeywords
PolímerosTecnología del hormigón
Propiedades de materiales
Polymers
Concrete
Materials
Abstract
[SPA] Esta tesis doctoral está centrada en el estudio de las propiedades mecánicas de materiales de construcción basados en geopolímeros compuestos por cenizas volantes y escoria a los que se le incorporan materiales de cambios de fase microencapsulados (MPCM por sus siglas en inglés). Las investigaciones realizadas se enmarcan en un proyecto financiado por el Consejo de Investigación de Noruega. Se ha evaluado el efecto de estas microcápsulas tanto en estado sólido como líquido en las propiedades mecánicas y la microestructura de estos hormigones basados en geopolímeros (GPC, por sus siglas en inglés) y cemento Portland (PCC, por sus siglas en inglés). Se prepararon muestras de GPC y PCC con diferentes cantidades de MPCM, realizando curados a 20 y 40 ºC. Se registró un descenso de la resistencia a la compresión en ambos materiales, pero manteniendo valores suficientemente elevados para su uso como materiales de construcción. Las propiedades mecánicas de GPC no se vieron afectadas por ... [ENG] This PhD Thesis focuses on the details of development of the mechanical properties of fly ash/slag geopolymer concrete incorporated with microcapsules for construction applications in the framework of a wide research program funded by the Research Council of Norway. The effect of MPCM in solid and liquid states on the mechanical properties and microstructure of geopolymer concrete (GPC) and Portland cement concrete (PCC) was investigated. GPC and PCC containing different amounts of MPCM were prepared and cured at both 20 °C and 40 °C. While the compressive strength of both GPC and PCC was found to decrease with the addition of MPCM, it is still sufficiently high for construction purposes. Whether the PCM is in solid (20 °C) or liquid (40 °C) state did not significantly affect the mechanical properties of GPC, while melting the PCM were found to reduce the strength of PCC. X-ray tomography imaging was utilized to examine the effect of MPCM on the porosity of the samples. SEM imaging ...
Collections
- Tesis [533]
The following license files are associated with this item:
Social media