Heat transfer enhancement in smooth tube with wire coil insert in laminar and transitional non-newtonian flow
EstadísticasVer Estadísticas de uso
MetadatosMostrar el registro completo del ítem
AutorGarcía Pinar, Alberto; Solano Fernández, Juan Pedro; Viedma Robles, Antonio; Martínez Hernández, David Sebastián
Grupo de investigaciónMecánica de Fluidos e Ingeniería Térmica
Área de conocimientoMecánica de Fluidos
Fecha de publicación2010
Cita bibliográficaGARCÍA PINAR, Alberto et al. Heat transfer enhancement in smooth tube with wire coil insert in laminar and transitional non-newtonian flow. En: International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (7ª: 2010: Antalya, Turkey), HEFAT 2010. 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics , Antalya, Turkey, 19-21 July 2010.
Palabras claveEnhanced heat transfer
Wire coil insert
Mayor transferencia de calor
Flujos no newtonianos
Bobinas de alambre
Flujos de transición
This work presents an experimental study on the heat transfer enhancement by means of a tube with wire-coil insert,for non-Newtonian laminar and transitional flow. The dimensionless pitch and wire diameter (based on the plain tube inner diameter) were chosen as p/D= 1 and e/D=0.09. Two pseudoplastic test fluids have been used: 1% by weight aqueous solutions of carboxymethyl cellulose (CMC) with high viscosity and medium viscosity. A wide range of flow conditions has been covered: Reynolds number from 10 to 1200 and Prandtl number from 150 to 1900. Isothermal pressure drop tests and heat transfer experiments under uniform heat flux conditions were performed on both the plain tube and the tube with wire-coil. The plain tube results have shown an excellent agreement with the available data. At Reynolds numbers below Re=400, the wire-coil insert has no effect in heat transfer. However, it becomes more effective as turbulence is established: at Re=1200, the wire-coil increases the heat ...
El ítem tiene asociados los siguientes ficheros de licencia: