Influence of welding parameters on grain size, HAZ and degree of dilution of 6063-T5 alloy: optimization through the Taguchi method of the GMAW process

View/Open
Identifiers
URI: http://hdl.handle.net/10317/12230
ISSN: 0268-3768
Exportar
Seleccione...
Share
Metrics
Statistics
View Usage Statistics
Metadata
Show full item record
Author
Meseguer Valdenebro, José Luis; Martínez Conesa, Eusebio José; Portoles, Antonio
Knowledge Area
Construcciones Arquitectónicas; Ingeniería de la Construcción
Sponsors
Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
Realizado en/con
Universidad Politécnica de Cartagena; Universidad Politécnica de Madrid
Publication date
2022-04-12
Publisher
SPRINGER
Bibliographic Citation
Meseguer-Valdenebro, J.L., Martínez-Conesa, E. & Portoles, A. Influence of welding parameters on grain size, HAZ and degree of dilution of 6063-T5 alloy: optimization through the Taguchi method of the GMAW process. Int J Adv Manuf Technol 120, 6515–6529 (2022). https://doi.org/10.1007/s00170-022-09094-3
Peer review
SI
Keywords
Weld
Aluminium
HAZ
Taguch
Optimization
Abstract
The aim of this work is to design experiments using Taguchi’s method that determine the influence of welding parameters on the grain size, heat-affected zone and degree of dilution of the 6063-T5 alloy. The welding process used is GMAW, and the welding parameters are the power, welding speed and bevel spacing. The study of the influence of these welding parameters on the measurements made during welding (which are the size of the heat-affected zone, the degree of dilution and the grain size) allows one to determine the quality of the joint. In addition, the welding parameter that most influences the minimisation of these three measurements will be determined.
Collections

The following license files are associated with this item:

Atribución-NoComercial-SinDerivadas 3.0 España
Except where otherwise noted, this item's license is described as Atribución-NoComercial-SinDerivadas 3.0 España