Mostrar el registro sencillo del ítem

dc.contributor.authorPisano, Alessandro 
dc.contributor.authorMartínez Ballester, Santiago 
dc.contributor.authorCorberán, José Miguel 
dc.date.accessioned2021-10-01T08:35:20Z
dc.date.available2021-10-01T08:35:20Z
dc.date.issued2015
dc.identifier.citationPisano, Alessandro; Corberán, José Miguel; Martínez Ballester, Santiago. Development of an experimental method to generate a non-uniform air flow distribution at the inlet of a heat exchanger. En: IX Congreso Nacional de Ingeniería Termodinámica: libro de actas. Cartagena: Universidad Politécnica de Cartagena, Servicio de Documentación, 2015. Pp. 1147-1154. ISBN: 978-84-606-8931-7es_ES
dc.identifier.isbn978-84-606-8931-7
dc.description.abstractAs already demonstrated by many authors, the non-uniformity of the air distribution at the inlet of both condensers and evaporators entails not negligible performance degradation. Its experimental quantification is mainly complicated by the difficulties connected to the air velocity measurement in a traditional air-conditioning installation. For this reason, many works are supported by the application of CFD models or others simulation tools. In order to analyze experimentally the effect of the nonuniform air distribution on the performance of a condenser, in this work a simple method for generating a specific air velocity profile at the inlet of a heat exchanger will be presented. It consist in allocating several filters along the heat exchanger height. Once characterized the filter, identifying the relation between the length of the filters, the pressure drop and the air velocity, any type of air velocity profile can be generated. The method presents high flexibility and allows being used with any typology of heat exchanger. In this work, the method will be used for generating a non-uniform air velocity profile at the inlet of two condenser: a round tube plate fins heat exchanger and a microchannel heat exchanger. The results show that, with a specific distribution of the filters, the nonuniform air velocity profile characterizing the A-shape condensation units has been reproduced with a very good agreement.es_ES
dc.description.sponsorshipThe work of Alessandro Pisano on this project was partially supported by the Ministry for Economy and Finance of Spain, under the Training of Researcher program (FPI). Financial support from the Ministry for Economy and Finance of Spain, project numbers: DPI2011-26771-C02-01 is gratefully acknowledged.es_ES
dc.formatapplication/pdfes_ES
dc.language.isoenges_ES
dc.publisherUniversidad Politécnica de Cartagenaes_ES
dc.rightsAtribución-NoComercial-SinDerivadas 3.0 España*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/*
dc.titleDevelopment of an experimental method to generate a non-uniform air flow distribution at the inlet of a heat exchangeres_ES
dc.typeinfo:eu-repo/semantics/conferenceObjectes_ES
dc.subjectAirflow malditributiones_ES
dc.subjectHeat exchangeres_ES
dc.subjectExperimental methodes_ES
dc.identifier.urihttp://hdl.handle.net/10317/9929
dc.identifier.doi10.31428/10317/9929
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses_ES
dc.contributor.convenianteUniversidad Politécnica de Cartagenaes_ES
dc.conference.titleIX Congreso Nacional de Ingeniería Termodinámica
dc.conference.datePublished2015-06-03
dc.conference.publisherUniversidad Politécnica de Cartagena


Ficheros en el ítem

untranslated

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Atribución-NoComercial-SinDerivadas 3.0 España
Excepto si se señala otra cosa, la licencia del ítem se describe como Atribución-NoComercial-SinDerivadas 3.0 España