Hybrid liquid desiccant system: design and simulation models and experimental validation
MetadataShow full item record
AuthorPeña Antón, Xabier; Alonso Ojanguren, Laura; Prieto González, Juan; Ortiga, Jordi; Gommed, Khaled
SponsorsThe research leading to these results has received funding from the European Union's Seventh Framework Programme FP7/2007-2013 under grant agreement n° 314701 (Nanocool project).
Realizado en/conUniversidad Politécnica de Cartagena
PublisherUniversidad Politécnica de Cartagena
Bibliographic CitationPeña Antón, Xabier; Alonso Ojanguren, Laura; Prieto González, Juan; Ortiga, Jordi; Gommed, Khaled. Hybrid liquid desiccant system: design and simulation models and experimental validation. En: IX Congreso Nacional de Ingeniería Termodinámica: libro de actas. Cartagena: Universidad Politécnica de Cartagena, Servicio de Documentación, 2015. Pp. 651-661. ISBN: 978-84-606-8931-7
The treatment of humidity on HVAC systems is crucial when a satisfactory indoor air quality needs to be reached. Traditional HVAC systems meet the latent cooling load by reducing the air temperature until its dew point, heating subsequently the air in order to reach the supply temperature for user comfort, with the energy waste this entails. On the other hand desiccant wheels requires normally an excessive post-cooling because of employed regeneration temperatures of around 70-80 ºC. In this paper the design and simulation models and testing results at laboratory scale of a hybrid liquid desiccant system (HLDS), developed in the frame of the EU project nanoCOOl, are presented. The HLDS is especially suited for applications with a low SHR (Sensible Heat ratio) and high ventilation requirements in tropical or subtropical climates. The aim of the project is to validate the developed technology for a good indoor environment quality, achieving the required ventilation needs, a good ...
The following license files are associated with this item: