Verification against failure by piping on retaining structures applying the network method
MetadatosMostrar el registro completo del ítem
Área de conocimientoIngeniería del Terreno
PatrocinadoresWe would like to thank the Séneca Foundation for the support given to this research and for the scholarship awarded to María Encarnación Martínez Moreno to carry out her doctoral thesis.
Fecha de publicación2020
Cita bibliográficaMartínez-Moreno, Encarnación & Alhama, Iván & García-Ros, Gonzalo. (2020). Verification against failure by piping on retaining structures applying the network method. Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering (CSEE’20).10.11159/icgre20.158.
When designing retaining structures, different phenomena must be studied in order to classify them as safe from a geotechnical point of view. Among them is pipping, a physical process related to seepage under the structure which leads to an unstable situation and might finally cause failure. In order to quantify this risk, a comparison between the critical gradient and the estimated hydraulic gradient is usually accepted. The calculation depends on geometric parameters, geotechnical data and flow boundary conditions, as well as the designed structure. Nevertheless, most of the universal solutions, such as graphics, have not been developed considering an anisotropic medium as foundation soil, so no realistic results are obtained. The aim of this work is to provide a methodology to obtain an estimation of the average gradient using a computational model based on the network method. This consists on the analogy between electrical magnitudes, such as voltage and intensity, and geotechnical ...
El ítem tiene asociados los siguientes ficheros de licencia: