Numerical assessment of the use of a dedicated mechanical subcooling system during hot water generation in a water to water transcritical CO2 heat pump
StatisticsView Usage Statistics
MetadataShow full item record
AuthorIllán Gómez, Fernando; García Cascales, José Ramón; Sánchez Velasco, Francisco Javier; Otón Martínez, Ramón Antonio
Knowledge AreaMáquinas y Motores Térmicos
SponsorsThe authors wish to acknowledge the financial support of the Spanish Ministry of Economy, Industry, and Competitiveness and the European Regional Development Fund through project ENE2017-83665-C2-2-P.
Realizado en/conUniversidad Politécnica de Cartagena
PublisherUniversidad Politécnica de Cartagena. Ediciones UPCT
Bibliographic CitationILLÁN GÓMEZ, Fernando et al. Numerical assessment of the use of a dedicated mechanical subcooling system during hot water generation in a water to wáter transcritical CO2 heat pump. En: XI Congreso Ibérico y IX Congreso Iberoamericano de Ciencias y Técnicas del Frío Cytef2022. Avances en Ciencias y Técnicas del Frío - 11. Cartagena: Universidad Politécnica de Cartagena, 2022. Pp. 19-25. ISBN: 978-84-17853-55-6
This paper presents a numerical study of the use of a dedicated mechanical subcooling (DMS) system using R1234yf, for hot water generation in a water-to-water CO2 heat pump. Compressor mass flow rates and power consumptions were modeled using the manufacturer’s correlations, expansion valves were modeled as isenthalpic, and heat exchangers were modeled by deriving correlations for the evaporation/condensation pressure and heat transfer rate. In the condenser, IMST-ART was used to obtain condensation pressure and heat transfer rate. A cell-by- cell discretization model was used for the evaporator, which was a transcritical CO2, subcritical R1234yf heat exchanger. Three different systems were compared for the transcritical CO2 cycle: with internal heat exchanger (IHX), with DMS, and with IHX+DMS. Results showed that, for the conditions studied (hot water generation up to 60 ºC and evaporator water inlet temperature from 5- 25 ºC), the use of a DMS does not improve the performance ...
The following license files are associated with this item: