Parameter studies of a machinal feed axis testbed in time domain by application of multibody simulation
Identificadores
URI: http://hdl.handle.net/10317/953Compartir
Métricas
Estadísticas
Ver Estadísticas de usoMetadatos
Mostrar el registro completo del ítemAutor
Sánchez Alacid, JuanDirector/a
Conde del Teso, JoséEscuela/Centro
Escuela Técnica Superior de Ingeniería IndustrialDepartamento
Ingeniería de Materiales y FabricaciónÁrea de conocimiento
Ingeniería de Sistemas y AutomáticaFecha de publicación
2009Editorial
Juan Francisco Sánchez AlacidPalabras clave
MáquinasMétodos de simulación
Resumen
The machine tool is a highly sophisticated technological product, which purpose is to provide capabilities to manufacture other products. This type of machine usually is not publicly recognized and, therefore, the advances and researches in the machine tool environment are widely unnoticed in the public. In recent years, the pressure on the manufacturers is increasing due to the necessity to improve the quality of these products while reducing the product development time and cost. For this reason, the use of virtual prototypes in the product development processes is being well accepted in this field. The benefit of using virtual prototypes is that it makes possible the simulation and the optimization of the machine properties in early stages. For it, the introduction of advanced engineering software tools is essential. Of these, the most commonly used in the machine tool industry is the finite element analysis (FEM), although at the moment, the multi-body simulation (MBS) is also being ...
Colecciones
El ítem tiene asociados los siguientes ficheros de licencia:
Redes sociales